Infinity Bond 161-224 Static Mixer Nozzle Overview
The Infinity Bond 161-224 is a direct cross to the Nordson 7701010 (TAH 161-224) made in the USA using super high quality materials. This static mixer uses a standard bell attachment and comes with a stepped tip that can be cut to adjust the diameter of adhesive bead being dispensed.
The 161-224 static mixer has a bell connection that requires a retaining nut to connect and is best used with larger cartridges (200, 400 or 600mil) or meter mix equipment. This static mixer is for 1:1 or 2:1 adhesives and uses 24 elements for mixing.
Works Great with:
- ?Epoxy
- Polyurethane
- Silicone
- Methyl Methacrylate
Replaces These Name Brand Mixers
- Nordson 7701010
- TAH 161-224
Additional Information
- Works with: 200mL, 400mL, 600mL cartridges
- Bell housing connection: 0.657 in/18.7mm
- Mix ratios: 1:1, 2:1
- Retaining nut: 7/8-9 thread or 7/8-14 thread
- Casing: Polypropylene
- Element: High strength Polyacetal
Infinity Bond 161-224 Static Mix Nozzle Specifications
- Casing: Polypropylene
- Element: High Strength Polyacetal
| Part Number | Inner Diameter (inch/mm) | Elements | Outer Diameter | Length (in/mm) | Nozzle Diameter | Tip Style | Retained Volume (in/mm) | Cartridge Size | Mix Ratio(s) |
| INFINITY 161-224 | .50/13.0 | 24 | 0.658/16.71 | 11.54/292.58 | 0.157/4.0 | Stepped | 4.2 | 200, 400, 600 | 1:1, 2:1 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
