About the Sulzer Mixpac MEF Static Mixer Nozzles
The Sulzer Mixpac MEF static mixer is used for dispensing 1:1 and 2:1 two part adhesives. The MEF Series mixer comes in a variety of element configurations and sizes and has a stepped tip that can be adjusted by simply cutting off the nozzle end to the desired orifice size.
Sulzer recommends the Statomix SH Series safety shrouds be used at all times when dispensing with these mixers.
Sulzer MEF Nozzle Configurations
- Sulzer MEF 06-24T
- Sulzer MEF 06-24T
- Sulzer MEF 06-32T
- Sulzer MEF 08-24T
- Sulzer MEF 08-32T
- Sulzer MEF 10-24T
- Sulzer MEF 10-32T
- Sulzer MEF 13-18T
- Sulzer MEF 13-24T
Gluegun.com offers a low price guarantee on the Sulzer MEF Static Mixer, for questions or volume discounts.
Sulzer Mixpac MEF Static Mix Nozzle Specifications
Elements: Polyacetal (POM)
Housing: Polypropylene (PP)
Sulzer Mixpac MEH Series Specifications and Part Numbers
Machine Mixer 1:1/2:1 with POM blue elements, F-interface and stepped tip nozzle.
| Part Number | Article/Number | Elements | inner ?(mm) | outlet ? mm | L(mm) | max operating pressure |
| 110591 | MEF 06-24T | 24 | 6.4 | 1.8 | 195 | 30 |
| 110591 | MEF 06-24T | 24 | 6.4 | 1.8 | 195 | 30 |
| 111666 | MEF 06-32T | 32 | 6.4 | 1.8 | 245 | 30 |
| 110592 | MEF 08-24T | 24 | 8 | 2.4 | 235 | 27 |
| 102463 | MEF 08-32T | 32 | 8 | 2.4 | 299 | 27 |
| 102464 | MEF 10-24T | 24 | 9.9 | 3 | 280 | 22 |
| 102465 | MEF 10-32T | 32 | 9.9 | 3 | 360 | 22 |
| 114327 | MEF 13-18T | 18 | 13 | 4 | 235 | 17 |
| 114330 | MEF 13-24T | 24 | 13 | 4 | 296 | 17 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
