Please Note: This kit includes Tinter matched to Toyota 040 White
- 4x 630ml 2K Protective Paint (Part A)
- 4x 210ml 2K Hardener (Part B)
- 1x 400ml Tinter
- 1x UBS coating Spray Gun
Protective coating with excellent chemical (oil, gasoline, water, salt) and mechanical resistance (scratches, stains). Resistant to weather conditions (UV filters) and corrosion (anti-corrosive agents). Can be painted on various substrates. It can be applied with the UBS antigravel gun as well as with a conventional gravity spray gun.
- Tough durable coating
- Great chemical and mechanical resistance
- Soundproofing properties
- Anti-slip structure
Add 10 - 15% of Automotive Paint (Basecoat or 2K Topcoat) to achieve desired colour. Shake well before use. Use only on well prepared, primed surfaces.
Application
- Shake Can well, add activator and 10 - 15% Automotive Paint (tinter)
- First layer ? spray evenly with sweeping motion and pressure of 2-4 bar until the proper coverage is obtained. The distance from the surface to be painted should be of ~50cm
- Allow to flash off for 30 - 50 minutes between coats
- Second layer - To achieve a soft, chunky texture, lower the pressure. If a finer finish is desired, increase the pressure. (Testing is recommended)
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
