3MTM PPSTM Type H/O Pressure Cup is a pressurized (H/O) hard cup and collar (cover) set that supports and holds 3MTM PPSTM flexible liner used in the 3MTM PPSTM (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns. Available sizes include Mini - 6 oz. and Large - 28 oz. cups. (May require pressure regulator (52-5R2) to supply cup with air pressure depending on spray gun model).

Specifications:

• 850 ml (28 oz.) cup size ? large
• For use with the 850ml (28 oz.) large liners & lids (3M part #?s 16024 & 16325)
• Pressurized hard cup ? High Output (H/O)
• Part Number 16124, 3M Stock # 7000119668 (Previous 3M Stock # 60455029417), UPC 00051131161245

Package (Box) includes:

• (1) 850ml (28 oz.) H/O pressure cup & cover
• (1) Piece of tubing used to pressurize the cup

*Mix ratio inserts sold separately.

Additional Details:

• Pressurized hard cups and collars use with 3MTM PPSTM (Legacy) paint preparation system
• Designed to efficiently spray thick, high viscosity liquids and increase work speed
• 3MTM PPSTM is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
• System enables the painter to consistently spray at 90? to the part, no matter the part orientation (even upside down)
• The all-in-one solution reduces the chance of outside contamination and reduces paint consumption
• PPSTM reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%
• System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use

Cup and Collars Support Liners
3MTM PPSTM Type H/O Pressure Cup is a component set for use with the 3MTM PPSTM (Legacy) paint preparation system. 3MTM PPSTM is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. These items are hard plastic cups and collars that provide support for 3MTM PPSTM flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPSTM Type H/O Pressure Cups excel at applying high viscosity coatings. Type H/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.

Advantages of the 3MTM PPSTMSystem
Unlike conventional paint cup systems, our 3MTM PPSTM eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPSTM, you place the disposable liner within the re-usable PPSTM Cup. Then simply mix the paint in the PPSTM disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPSTM System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPSTM allows the painter to spray consistently 90? to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.

Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPSTM adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPSTMstainless steel metal adapters allow painters to use the PPSTM system with virtually any spray gun. Painters have also the option to use the 3MTM AccusprayTM ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

The Bottom Line: Why 3M is the Paint & Coatings Spray System of Choice
3MTM PPSTM is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.

*(Please note that the 3MTM PPSTM 850ml H/O Pressure Cup may require a pressure regulator (52-5R2) to provide pressure to the cup when used with most pressure feed spray guns. If the spray gun has a ported head this regulator will not be needed as the tubing will connect to an air stem on the spray gun to supply the cup with air pressure.)