KEY FEATURES AND BENEFITS:
- Approximately Touch Dry In 4 - 6 hours.
- Available In 2 colours.
- Heavy Duty and Long Lasting.
- High durability and is easy to clean.
- For use with
DESCRIPTION
A single pack low viscosity penetrating first coat primer designed to soak into the substrate, providing excellent adhesion of subsequent topcoats.
This product will reduce any risk of delamination due to poor penetration of heavy top coats.
Suitable for use with "" and to be used on bare or painted concrete.
COLOURS AVAILABLE
The sealer is clear.
SPREADING RATE (Coverage)
Approximately 6-10 square metres per litre.
DRYING TIME
Under normal circumstances, it should be touch dry in 4-6 hours if well-ventilated and conditions are dry.
APPLICATION
Brush, Roller, or Sprayer.
Make Sure the Surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
THINNERS
White spirit or turpentine substitute can be used for thinning.
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from algae and moss.
Ensure the surface is completely dry and free from condensation and dampness.
Remove any loose or flaking paint.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
