Infinity Bond 160-624 Slip Luer Static Mixer Overview
The Infinity Bond 160-624 disposable static mixer with slip luer tip is a high quality, low cost equivalent to the Nordson 7700837 (formerly TAH 160-624) offering significant cost savings without sacrificing performance.
The 160-624 static mixer has a bell connection that requires a retaining nut to connect and is best used with larger cartridges (200, 400 or 600mil) or meter mix equipment. This static mixer is for 1:1 or 2:1 adhesives and uses 24 elements for mixing.
Works Great with:
- ?Epoxy
- Polyurethane
- Silicone
- Methyl Methacrylate
Replaces These Name Brand Mixers
- 3M 87982
Additional Information
- ?Inner Diameter: 0.251" (6.38mm)
- Elements 24
- Outer Diameter: 0.383" (9.73mm)
- Length: 7.29" (185mm)
- Outlet Style: Slip Luer
- Retained Volume: 4.2
- Works With: 200, 400, 600 ml Cartridges
- Mix Ratio: 1:1 & 2:1
Infinity Bond 160-624 Static Mix Nozzle Specifications
- Casing: Polypropylene
- Element: High Strength Polyacetal
| Part Number | Inner Diameter (inch/mm) | Elements | Outer Diameter | Length (in/mm) | Nozzle Diameter | Tip Style | Retained Volume (in/mm) | Cartridge Size | Mix Ratio(s) |
| INFINITY 160-624 | 0.251/6.38 | 24 | 0.383/9.73 | 7.27/9.73 | 0.076/185.17 | Slip Luer | 4.2 | 200,400,600 | 1:1, 2:1 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
