About the Techcon TS-SS Series Metal Tips for Automated Adhesive Dispensing
The Techcon TS-SS Series dispensing tips are a composed of a stainless steel cannula and nickel plated brass hub. All of the TS-SS Series needles are 1/2" in length but they are available in a wide range of gauge sizes to precisely control the bead size. These needles were developed specifically for automated dispensing applications, especially those with higher pressure outputs.
Additional Information on the TS-SS Series Needles
- Sold in Packs of 12
- 1/2" Length
- Stainless Steel Cannula
- Nickel Plated Brass Bub
- Multiple Gauge Sizes Available
Techcon Systems and Gluegun.com
Gluegun.com is a premier Techcon Systems partner offering exceptional service on all of the Techcon products as well as a low price guarantee. to answer any questions you have on the TS-SS Series metal tips or any of the Techcon dispensing products.
Techcon TS-SS Metal Adhesive Dispensing Tip Specifications
Part Number | Gauge | I.D. (inches) | I.D. (mm) |
Techcon TS12SS-1/2PK | 12 | 0.087 | 2.21 |
Techcon TS13SS-1/2PK | 13 | 0.077 | 1.95 |
Techcon TS14SS-1/2PK | 14 | 0.061 | 1.54 |
Techcon TS15SS-1/2PK | 15 | 0.056 | 1.43 |
Techcon TS16SS-1/2PK | 16 | 0.048 | 1.22 |
Techcon TS17SS-1/2PK | 17 | 0.044 | 1.11 |
Techcon TS18SS-1/2PK | 18 | 0.033 | 0.83 |
Techcon TS19SS-1/2PK | 19 | 0.028 | 0.72 |
Techcon TS20SS-1/2PK | 20 | 0.024 | 0.62 |
Techcon TS21SS-1/2PK | 21 | 0.021 | 0.54 |
Techcon TS22SS-1/2PK | 22 | 0.017 | 0.42 |
Techcon TS23SS-1/2PK | 23 | 0.013 | 0.34 |
Techcon TS25SS-1/2PK | 25 | 0.011 | 0.27 |
Techcon TS26SS-1/2PK | 26 | 0.010 | 0.25 |
Techcon TS27SS-1/2PK | 27 | 0.008 | 0.21 |
Techcon TS28SS-1/2PK | 28 | 0.007 | 0.17 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.