This unit was standard equipment on early Croplands ATV spray units.
- Maximum Flow is 6.4 LPM (Open Flow)
- Maximum Pressure is 6 bar (75 psi) cut-out pressure,
- Power input is 12v DC,
- Diaphragms are Buna,
- Check Valves are Viton,
- Pump Body is Polypropylene,
- Connections are 1/4 female BSP threads,
- Maximum liquid temperature is 54 degrees C.
Constructed with polypropylene housing, viton check valves & Buna diaphragm to handle a broad range of agricultural and chemicals products plus many other applications
- In built pressure switch automatically starts and stops the pump when the discharge valve opens and closes.
- Ball bearing drive throughout the pump and motor assures longer pump life,
- Self-priming up to 2.4m so the pump can be located above the supply tank,
- Can run dry for short periods of time without damage,
- Built-in thermal protection,
- Low Amp draw for battery powered applications,
- Heavy duty ball bearing drive system
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
