About the ASI MP 5405BK Black 5 Minute Epoxy Adhesive
The Adhesive Systems Inc ASI MP5405BK is black colored epoxy that sets in 3-5 minutes depending on environmental conditions. This adhesive will bond most substrates including difficult surfaces like metals, plastics and ceramic.
The MP 5405BK cures into a semi-rigid material and can withstand water, humidity, salt, inorganic acids, inorganic bases and most organic solvents.
Dispensing the ASI MP 5405BK Black Epoxy
The ASI MP5405 BK is a two part epoxy. This means the A and B sides of the adhesive do not activate until they are mixed. Typically, this adhesive is dispensed using a cartridge gun and static mixer. The cartridge gun used will depend on whether you are using the 50ml or 400ml cartridge.
ASI MP 5405BK Black 5 Minute Epoxy Specifications
- Ratio: 1 to 1
- Viscosity: 13,000
- Color: Black
- Work Life: 3-5 Minutes
- Shear Strength: 2,000 to 4,000 psi
- Dielectric Strength: 400 Volts/Mils
- Hardness Shore D: 80
ASI MP 5405BK Black Epoxy Adhesive Data Sheets
ASI MP 5405BK Technical Data Sheet
ASI MP 5405BK Safety Data Sheet
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
