BENEFITS:
- Excellent resistance to staining.
- Resists stains and water damage.
- Prevents mould formation.
- Especially suitable where a high gloss finished is not required.
- Stops staining on concrete.
- Great washability.
DESCRIPTION
Paintmaster concrete sealer is an air-drying, water-borne, all acrylic resin-based sealer which provides a durable sealer coat with an eggshell finish fine for use indoors.
USES
Suitable for use on concrete.
Not for use on Indian stone.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
Approximately 6-8 sq./metres per Litre, depending on surface porosity and texture.
DRYING TIME
Under normal conditions, it is touch dry in approximately 2-3 hours.
APPLICATION
Brush, Roller, or Airless Spray.
Make Sure the Surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
THINNERS
Water can be used for thinning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
