ACTUATORS ARE INSTALLED ON THE 2ND DIMENSION, PHOTO IS GENERIC AND MAY NOT REPRESENT THE PART BEING ORDERED
Features
^^This damper is 26" by 20". The motor/lever is installed on the 20" side. Full dimensional specifications are in the datasheet below.
Rectangular Damper | 26X20 ND MOTORIZED DAMPER
Features
- Construction?Heavy Duty extruded aluminum.
- Nylon Bearings for quiet operation.
- Overlapping parallel blades for low leakage.
- Power open/Power closed.
- Designed to operate at static pressures up to 1.5? w/ less than 5% Leakage.
- UL Listed Motor Actuator is a 24vac 3 wire power open/ power close type rated at 18?lbs. of torque.
- The Motor Actuator housing is NEMA1 Rated.
- End-Stops Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
- Bright LED?s Indicate damper position.
- Available in 8" x 6" thru 30" x 30" in one inch increments. Custom Sizes can be manufactured, contact EWC Controls Inc.
Resources
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
