Henkel Loctite 435 Prism Cyanoacrylate
Loctite 435 is a low viscosity toughened cyanoacrylate giving it excellent shock and vibration resistance. The 435 is surface insensitive and bonds well to most substrates including metals, plastics, and rubbers.
The Loctite 435 is clear, flexible and CFIA listed (in case you're a Canadian food packager).
* for less than case pricing.
Henkel Loctite 435 Specifications
| Agency Approvals / Specifications | ISO 10993 |
| Application Method | Immersion, Spray |
| Color | Clear |
| Cure Type | Moisture Cure |
| Fixture Time | 30 sec. |
| Full Cure Temperature (?C) | 25 |
| Full Cure Temperature (?F) | 77 |
| Full Cure Time | 24 hr. |
| Gap Fill (in.) | 0.006 |
| Key Characteristics | Usability: Easy to Use, General Purpose, Impact Resistant, Surface Insensitive, Toughened, Viscosity: Low Viscosity |
| Number of Components | 1 Part |
| Physical Form | Liquid |
| Shear Strength, Grit Blasted Steel (psi) | 2700 |
| Specific Gravity (g/l @ 25?C) | 1.1 |
| Substrates | Elastomer, Metal, Plastic, Rubber, Thermoplastic, Thermoset |
| Technology | Ethyl Cyanoacrylate |
| Temperature Range (?F) | 70 to 160 |
| Viscosity (Brookfield mPa.s (cP)) | 175 |
| Viscosity Temperature (?C) | 25 |
| Viscosity Temperature (?F) | 77 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
