About the ASI HP Series Cyanoacrylate Super Glue
The Adhesive Systems Inc (ASI) HP Series cyanoacrylate is a rubber toughened super glue formulated for maximum impact resistance. The rubber toughened HP Series also offers great thermo cycling properties and sheer strength.
Benefits of the HP Series Cyanoacrylates
- Rubber Toughened for maximum impact resistance
- Provides strong bond even with vibrations
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Fast cure time
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
The HP Series Cyanoacrylates Bond:
- ABS NBR
- Acrylic Neoprene
- Aluminum Nitrile
- Bakelite Nylon
- Brass Phenolic
- Chloroprene Polycarbonate
- Chrome Polyester
- Cooper Polystyrene
- EPDM Porcelain
- Fiberglass PVC
- Latex SBR
- Leather Steel
- Natural Rubber Valox
- Wood
ASI HP Series Rubber Toughened Cyanoacrylate Specifications
Properties
- Color: Black
- Viscosity: 300
- Specific Gravity: 1.10
- Base: Modified Ethyl
Chemical and Solvent Resistance
% OF STRENGTH RETAINED AFTER AGING FOR 500 HOURS
- GASOLINE @ 220C: 100%
- ISOPROPANOL @ 220C: 100%
- ETHANOL @ 220C: 100%
- FREON TA @ 220C% 100%
- MOTOR OIL @ 400C% 100%
- POLYCARBONATE 400C @ 95% RH 100%
Cure Time and Bond Strength By Substrate
- Steel < 12 Seconds > 2100 psi
- Aluminum < 12 Seconds > 1750 psi
- Neoprene < 5 Seconds > 750 psi
- ABS < 10 Seconds > 900 psi
- PVC < 5 Seconds > 900 psi
- Polycarbonate < 10 Seconds > 900 psi
- Phenolic < 10 Seconds > 850 psi
Specifications By Viscosity
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| HP 300 | 0.006 | 300 cps | 3750 | -65 to+250? F | <10 Sec/8 Hours | Type II, Class 2 |
| HP 1000 | 0.009 | 1,000 cps | 3750 | -65 to+250? F | <12 Sec/8 Hours | Type II, Class 3 |
| HP 4000 | 0.01 | 4,000 cps | 3750 | -65 to+250? F | <18 Sec/8 Hours | Type II, Class 3 |
| HP 10000 | 0.012 | 10,000 cps | 3500 | -65 to+250? F | <20 Sec/8 Hours |
ASI HP Series Cyanoacrylate Data Sheets
ASI HP Series Technical Data Sheets
ASI HP Series Safety Data Sheet
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
![BENNETT MARINE Bennett BOLT 24x9 Electric Trim Tab System Control Switch Required [BOLT249]](https://cdn.shopify.com/s/files/1/0550/4407/9795/products/54106XL.jpg "BENNETT MARINE Bennett BOLT 24x9 Electric Trim Tab System Control Switch Required [BOLT249]")
![BENNETT MARINE Bennett BOLT 6x12 Edge Mount Trim Tab System [BOLT612ED]](https://cdn.shopify.com/s/files/1/0550/4407/9795/products/69710XL.jpg "BENNETT MARINE Bennett BOLT 6x12 Edge Mount Trim Tab System [BOLT612ED]")
![BENNETT MARINE Bennett BOLT Actuator Wire Harness Extension 20' [BAW2020]](https://cdn.shopify.com/s/files/1/0550/4407/9795/products/54123XL.jpg "BENNETT MARINE Bennett BOLT Actuator Wire Harness Extension 20' [BAW2020]")
![BENNETT MARINE Bennett BOLT Adjustable Actuator Kit Less Tabs (Relay Module Not Included) [BOLTBLTADJ]](https://cdn.shopify.com/s/files/1/0550/4407/9795/products/80225XL.jpg "BENNETT MARINE Bennett BOLT Adjustable Actuator Kit Less Tabs (Relay Module Not Included) [BOLTBLTADJ]")
![BENNETT MARINE Bennett BOLT Keypad Wire Extension 10' [BHW4010]](https://cdn.shopify.com/s/files/1/0550/4407/9795/products/54127XL.jpg "BENNETT MARINE Bennett BOLT Keypad Wire Extension 10' [BHW4010]")
