Monkey Rung Spin Pro Paint Roller Cleaner Tool

INSTRUCTIONS:
1) Attach SPIN PRO into cordless drill and lock tight.
2) Insert 3", 9", 14" or 18" roller nap onto the SPIN PRO until snug.
3) Put drill on high speed and spin off excess paint into an empty bucket or cardboard box.
4) Spin roller nap for approximately 45-60 seconds in a second bucket containing water to allow submersion of the roller nap. Keep roller close to inside edge of bucket to minimize splash.
5) Spin excess moisture off for approximately 5 seconds into an empty bucket or cardboard box.
6) For larger roller naps, repeat step #4 if necessary.
7) PLACE DRILL IN REVERSE ON LOW SPEED TO REMOVE CLEAN ROLLER NAP.
Use clean water with each rinse.
RECOMMENDED FOR USE WITH CORDLESS DRILLS ONLY