Suitable for high capacity 12v spraying with spray booms (when used with pressure regulator) or running multiple spot spray guns.
FB2 Series 7.0 GPM Diaphragm Pump
Detail;
- Pump Type: Bypass, Demand
- Flow: Up to 26.5 L/min (7 GPM)
- Pressure: Up to 6.9 Bar (100 PSI)
- 25 Amps - 35 Amps Surge (Max) Current Draw
- Valves: Viton
- Diaphragm: Santoprene
- Ports: 5D Quick release ports.
- Power: 12V
- Weight: 3.63 Kg (8 lbs)
- 100% Factory tested
- Heavy Duty Reinforced Diaphragm for longer life
- High Torque Motor for superior flow at pressure
- Self-Priming
- Can be run dry
Demand Pumps include a built-in pressure switch to automatically stop and start the pump at specific pressure settings. These pumps only run when discharge outlets are open and fluid delivery is needed. However, ON/OFF cycling at extreme frequency can cause damage to the pump components.
Advantages: Pump only runs when flow is needed and offers reduced noise during system idle. Automatically turns pump off when not in use. Common Uses: Spot spraying, soft wash, single outlet systems.
Rapid spray APD0265Q12E
!["Made]("https://cdn.shopify.com/s/files/1/0589/1057/2700/files/made-in-usa_50x50.jpg?v=1636324656")
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
