Single Unit Manual Switch, 30A, NEMA 4, 3-Pole, Toggle Operated, Red Indicator, 600VAC

Single Unit Manual Switch

• Line Rated Current: 30A
• Motor Power HP: 2 HP at 115V AC; 1 HP at 90V DC; 2 HP at 115V DC; 1.5 HP at 230V AC; 7.5 HP at 230V AC, 10 HP at 460V AC, 575V AC
• System Voltage: 600V AC, 230V DC
• Poles Description: 3-Pole
• Control Type: Toggle Switch
• Number of Phases: 3-Phase
• Local Signaling: Red Indicator 440-600V
• Motor Starter Type: Non-Reversing
• Electrical Connection: Screw Clamp Terminals

2510K manual motor switches are designed for manual On Off control for small motors. This three pole switch is rated for 2 HP at 115VAC, 7.5 HP at 230VAC, 10 HP at 460VAC, and 10 HP at 600VAC three phase. It is also rated for 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC motors. Overload protection for the motor must be supplied separately. 2510K switches can be ordered in a variety of enclosure types. This device is in a surface mount NEMA 4 watertight enclosure. A 3/4 inch conduit opening is on the bottom of the enclosure. This switch comes as standard with a 440 to 600 volt red pilot light. Enclosure as a provision to allow padlocking of this device. 2510K manual switches are UL listed and CSA certified. A NEMA 4 watertight and dusttight die cast zinc alloy enclosure is used to protect this manual motor switch. This enclosure has one conduit entry on the bottom. The 0.75 inch conduit entry is tapped with number 14 pipe threads. This device is 4.38 inches tall, 3.00 inches wide and 4.56 inches deep. A toggle handle is used to turn the manual starter on and off. The toggle handle can be padlocked in the off position. This device is UL Listed and CSA certified.

Product

Single Unit Manual Switch

Type

K

Current Rating

30 A

Cable Entry

0.75 NPT (bottom)

Horsepower Rating

2 hp 115 V AC;1 hp 90 V DC;2 hp 115 V DC;1.5 hp 230 V DC;7.5 hp 230 V AC;10 hp 460 V AC;10 hp 575 V AC

Maximum Voltage Rating

600 V AC;230 V DC

Number of Poles

3P

Control Unit Type

Toggle

Number of Phases

3 phase

Pilot Light

Red indicator;440...600 V

Starter Type

Non reversing

Electrical Connection

Screw clamp terminals

Wire Gauge

AWG 14...AWG 10 copper

Height

4.38 in (111.25 mm)

Width

3 in (76.20 mm)

Depth

4.56 in (115.82 mm)

Certifications

UL listed file E42243 CCN NLRV;CSA LR25490 class 3211 05

NEMA Enclosure Rating

NEMA 4 die cast zinc alloy standard size

Category

21102-2510;2511;2512 K

Discount Schedule

CP1

GTIN

785901436584

Returnability

Yes

Country of origin

MX

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

3.60 in (9.144 cm)

Package 1 Width

4.70 in (11.938 cm)

Package 1 Length

5.40 in (13.716 cm)

Package 1 Weight

2.92 lb(US) (1.325 kg)

Warranty

18 months

Resources