BENEFITS:
provides an effective waterproof, weatherproof, corrosion-resistant protective coating.When dry, the product forms an odourless and taint-free bitumen film
Suitable for use with portable drinking water tank
It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation.
DESCRIPTION
Solvent-based, full bodied black bitumen coating. When dry, the product forms an odourless and taint-free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre, cement, corrugated iron, asphalt and wood against water attack.
Suitable for use with a portable drinking water tank, provides an effective waterproof, weatherproof, corrosion-resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation
USES
suitable for the protection of metals, concrete roofing, felt, fibre, cement, corrugated iron, asphalt and wood against water attack.
SPECIAL PROPERTIES
resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation.
When dry, the product forms an odourless and taint-free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre, cement, corrugated iron, asphalt and wood against water attack.
SPREADING RATE
Approximately 10 square metres per litre. Less on porous surfaces
DRYING TIME
Under normal circumstances, it should be touched dry in 6-8 hours if well-ventilated and conditions are dry.
Leave 48 hours between coats.
APPLICATION
Brush, Roller, or Sprayer.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.
Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening.
THINNERS
White Spirit or Turpentine Substitute can be used for thinning.
SURFACE PREPARATION
All surfaces should be degreased, clean and free from dirt. Note: Bitumen may bleed through any paint subsequently applied over it.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
