Flojet 6.8 LPM 12VDC 95 PSI self priming diaphragm demand water pump. Constructed with polypropylene housing, EDPM check valves & diaphragm to handle a broad range of agricultural and chemicals products plus many other applications
- In built pressure switch automatically starts and stops the pump when the discharge valve opens and closes.
- Ball bearing drive throughout the pump and motor assures longer pump life,
- Self-priming up to 2.4m so the pump can be located above the supply tank,
- Can run dry for short periods of time without damage,
- Fan cooled motor for improved running in tough conditions
- Built-in thermal protection,
- Low Amp draw for battery powered applications
- 1/4 female ports
- Heavy duty ball bearing drive system
Features
Maximum Flow is 6.8 LPM (Open Flow)
Maximum Pressure is 6.5 bar (95 psi) cut-out pressure,
Power input is 12v DC, Motor fitted with fan,
Diaphragms are EDPM,
Check Valves are EDPM
Pump Body is Polypropylene,
Connections are 1/4" female threads,
Maximum liquid temperature is 54 degrees C.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
