QTech SILVERPRO HVLP SPRAYER AIR CAP SET
QTech HVLP Sprayer Air Cap Set to suit the SilverPro HVLP spray gun
A multipurpose HVLP Sprayer Air Cap set is fitted to all SilverPro HVLP Spray guns that is generally used for most water borne and solvent based coatings.
This is a good starting point; however there are several more air cap sets to choose from that may be better suited for the type of material you are spraying.Your QTech HVLP Sprayer system can handle almost any type of material provided you...
- use the correct air cap set
- thin your material appropriately
Suits the QTech SilverPro HVLP spray gun
1.0 mm
It is for fine to medium output is great for most fine finishing including many water-based/borne coatings.
1.3mm
1.3mm air cap set is also ideal for most water-based/borne products. This air cap set is also great for polyurethane and oil-based paints when thinned properly.
1.8 mm
The 1.8 mm is our high output air cap set. It is ideal for larger surfaces and thicker layers. It is also great for primers, industrial coating (higher viscosity), oil-based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls), splatter paints and multi fleck paints.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
