The P200Z is a rugged, general purpose, conventional air spray gun designed for spraying zinc-rich coatings. Our P200Z has a Delrin tipped fluid nozzle to prevent plating and a unique leather / Teflon packing arrangement that increases your spraying time before the gun needs to be cleaned. The body and air cap are Teflon anodized to aid in clean-up and extend the life of the gun. This gun comes standard with air-adjusting valve, stainless steel fluid passages and heavy-duty needle return spring.
Features & Benefits
*(Please note that the repair kit for the P200Z is part # 10-108. For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).
Specifications:
- The P200Z CAT Pack (CP-ZPack) includes three needle and nozzle sizes (2.2 mm - Delrin, 2.2 mm & 1.8 mm Delrin), 22-2064T air cap, multi-purpose wrench, and a cleaning brush all contained in a handy carrying case.
- The spray gun has 100% stainless steel fluid passages.
- Air Inlet - 1/4? NPS (m)
- Fluid Inlet ? 3/8? NPS (m)
- Weight ? 20 oz.
- Teflon hard coated body
- Air Cap (22-2064T) requires 22 cfm @ 80 psi (*Spray gun inlet pressure may vary as required by application).
Features & Benefits
- Teflon coated body and air cap to keep the cleanup work to a minimum and increase the equipment life
- Unique Delrin coated fluid nozzle to prevent plating and build up that can happen when spraying Zinc coatings
*(Please note that the repair kit for the P200Z is part # 10-108. For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
